SEH Print Server Manual do Utilizador descarregar pdf (Página 13)

Hardware Installation Guide 13

 Mounting the Print Server

The print server allows printers and plotters to be connected to the network via

the Centronics interface.

A status page can only be printed if the printer supports ASCII, PostScript,

DATAMAX (label printer), or the Citizen-Z (label printer) format.

Connect the print server to the printer

Proceed as follows:

1. Turn the printer off.

2. Disconnect the printer's power cord.

3. Plug the print server on to the printer's Centronics interface.

Connect the print server to the network

Proceed as follows:

1. Connect the network cable (RJ-45) to the print server.

2. Connect the power pack's power cord to the print server.

3. Connect the printer's power cord to the printer.

4. Turn the printer on.

5. Press the status button of the print server in order to print out

a status page.

1 2 ... 8 9 10 11 12 13 14 15 16

Sem comentários

SEH Print Server Manual do Utilizador Página 13